Skip to content
Black Week until 30.11.: 15% off everything. Applied automatically in your cart.
1

/ NLA Shop

Charging cable falls behind the desk: cable clip or Velcro strip?

Sechs weisse magnetische Kabelclips zum Aufkleben, ohne Kabel oder Elektrogeräte.

You unplug your phone and the end of the charging cable disappears behind the desk. Or there are several cables lying on the shelf that you don't need right now. Both look like cable chaos, but they don't need the same solution: A clip keeps a cable you use handy. A Velcro strap can bundle an unused cable. These checks will help you figure out what makes sense for your workspace.

1. What is the holder actually supposed to do?

First, only place the cables on the desk that you use there regularly. If a cable end needs to remain accessible after unplugging, you need a fixed guide in a suitable place. If, on the other hand, you want to keep a stored cable from falling apart, you need to hold a loop together.

Sort rarely used cables separately and, if necessary, label which device they belong to. Perhaps this separation is enough and you need fewer holders than you thought.

2. A cable clip for the end you need handy

The 6-piece set of magnetic cable clips to stick on in white is designed for charging and connection cables on a suitable smooth surface. The flip clasp opens to insert the cable. Once closed, the cable can be moved within the clip.

Check the fit with your own cable before peeling off the protective film from the adhesive pad. The clasp should close easily without squeezing the cable jacket. You can find the diameter limit specified by the supplier in the product description. Not every thick or particularly stiff cable will automatically fit.

Magnetic here does not mean that the clip is attached to a metal tabletop: The magnet is part of the flip clasp. The surface is attached using the adhesive pad. Cables, chargers, and devices are not included.

3. A Velcro strap for stored cables

If you want to store a cable, bundling is the other task. The black self-adhesive cable holders with Velcro clasp hold coiled cables together with a band that can be reopened. The offered set contains 30 holders.

Place an unconnected cable in loose loops and check if the band closes around it. Do not pull it so tight that kinks are created, and do not bend the cable directly at the connector. A band that can be reopened is not the same as a reusable adhesive side: Repeated re-sticking is not guaranteed with these holders.

4. Test the space before sticking

First, hold the holder against the planned spot and guide the cable there as a test. Can you easily reach the end? Is the length sufficient even if you lift your device or move your chair? Leave enough slack so that no tension is placed on the connection. The holder is meant to guide the cable, not support the device.

Next, check the surface. For the linked adhesive solutions, the surface must be suitable, smooth, clean, and dry. Loose coatings, peeling paint, or uneven areas are not a good foundation. Test sensitive surfaces discreetly first; residue-free removal is not guaranteed. Keep away from hot surfaces and follow the respective installation instructions.

5. Decide quickly instead of sticking everything down

  • Cable end disappears: Check for a suitable clip in an easily accessible place.
  • Unused cable is lying around loosely: Bundle it loosely and check for a suitable Velcro strap.
  • You change your workspace frequently: First consider whether a permanently stuck solution suits your usage at all.
  • Surface or fit unclear: Do not stick it yet; first compare the product specifications with your cable and furniture.

Start with a single cable and observe whether you can conveniently plug it in, pull it out, and put it away in everyday use. Only after that is it worth placing additional holders. Small parts and magnets are not for children's hands.

If you would like more insights from the NLA Shop, you can find us on Instagram at @rh_nla_shop.

Cart

Freigestelltes Produktbild – Vorderseite Dazu passt2-in-1 Cleaning Tool for Hairbrushes – Green
$17.00 USD

Black Week · 15 % −$10.65 USD

Subtotal$60.35 USD
View cart